Review by The SimPit
Your cart is currently empty!.
You may check out all the available products and buy some in the shop.
Continue Shopping
3D Printed Sim Racing Pedals – STL Files & DIY Build
$19.99Build your own affordable 3D printed pedals for $30-50 with this 3D Printed Sim Racing Pedals project. Designed around an Arduino and one potentiometer per pedal, this simple and low-cost pedal set is perfect for games like Forza Horizon, Forza Motorsport, Euro Truck Simulator 2 and other racing or driving games.
You can also install the electronics from name-brand pedal sets that use three potentiometers (such as the Logitech G29 / G920). This way, you can use that pedal set while maintaining compatibility (PS4, PS5, Xbox, PC).
What’s Included:
- CAD Model Files (.STL): complete 3D printable models ready for any standard 3D printer
- Arduino Sketch + Wiring Diagram: You need one Arduino Pro Micro board and a potentiometer for each pedal.
- Assembly Tutorial: a complete guide (How to make a DIY Load Cell Pedals) showing you how to assemble the pedals (you should only read the tutorial on the throttle or clutch pedal)
- Bill of Materials: A complete list of all parts required to build this project is available in the "Bill of Materials" tab, and a second, more general shopping list is available in the BOM & Sourcing Guide.
-
3D Printed DIY Sim Racing Pedals – CAD Plans
$29.99Build your own 3D Printed Sim Racing Pedals. These CAD plans give you everything you need to make throttle, clutch, and brake pedals designed to support +100kg of pressure. The downloadable CAD Files includes everything you need to print, assemble, and wire your pedal set.
The 3D Printed Pedals are similar to the Sim Racing Pedals, but it only includes the 3D printable version.
What’s Included:
- CAD Model Files (.STL): complete 3D printable models ready for any standard 3D printer
- Arduino Sketch + Wiring Diagram: pre-configured for the Arduino Pro Micro / Leonardo USB boards
- Assembly Tutorial: a complete guide (How to make a DIY Load Cell Pedals) showing you how to assemble the pedals
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
-
DIY Audi DTM Steering Wheel – Premium CAD Plans
$29.99This High-Quality CAD plans give you all you need to build your own DIY Audi DTM wheel at home
What’s Included:
- CAD Files of the DIY Audi DTM Steering Wheel:
- 3D Printing — STL files
- Laser Cutting — DXF files
- Hand Cutting — A3 Printable PDF Sheets
- CNC Machining — STEP files
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
- Arduino Sketch & Wiring Diagram for the Pro Micro USB board (supports up to 10 buttons, including shifters)
- Printable A4 Sheet of Button Stickers
- Full Assembly Guide
- CAD Files of the DIY Audi DTM Steering Wheel:
-
DIY F1 Steering Wheel – CAD Plans
$29.99Download and build your own DIY Formula One Steering Wheel at home with our CAD Files.
What’s Included in the download:
- CAD files: STL, STEP, and DXF formats for compatibility with 3D printers, laser cutters, and CNC machines.
- Arduino sketch & wiring diagram: preconfigured for the Arduino Pro Micro USB board
- Build tutorial: a full guide showing you how to assemble the Steering Wheel
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
-
DIY Magnetic Paddle Shifters – CAD Plans
$9.99Build your DIY Magnetic Paddle Shifter for your Steering Wheel.
What’s Included:
- CAD Model Files for the DIY Magnetic Paddle Shifters
- Includes STL, STEP, and DXF formats for full compatibility with 3D printers, laser cutters, and CNC machines.
- Complete list of all parts you need to build the project (screws, electronics...)
- Bill of Material (here and in the BOM & Sourcing Guide)
-
DIY Button Plate – CAD Plans
$29.99Download and make your DIY Sim Racing Button Plate at home with our CAD plans.
What’s Included:
- CAD Model Files: provided in STL, STEP, and DXF formats for full compatibility with 3D printing, laser cutting, and CNC machining.
- Arduino sketch & wiring diagram: preconfigured for the Arduino Pro Micro USB board
- Step-by-Step Build Tutorial: a clear guide showing you how to assemble the button plate without advanced skills or expensive tools.
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
-
DIY Wood Sim Rig – Pro PDF Plans
$29.99Build your DIY Wood Sim Racing Rig with our CAD Plans. Our design provide everything you need to build a professional DIY cockpit at home. This wooden playseat offers a sleek, modern aesthetic that fits into any room.What’s Included in the download:
- CAD Files: STEP and DXF files for CNC machining and laser cutting
- Manual Cutting Templates: A3 & A2 PDF drawings with full dimensions in both metric (mm) and imperial (Inches)
- Assembly Guide: A full PDF tutorial to guide you through the build process
- 3D Animated Assembly Video: Visualize exactly how every piece fits together before you start
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
View Full Details -
Sim Racing Pedals – DIY Project
$39.99Build your Stainless Steel or 3D Printed DIY Load Cell Pedals for Sim Racing. This Premium CAD Suite allows you to make a linear throttle, an hard 120 kg load-cell brake, and a degressive clutch pedals.
This is the first project designed by DIY Sim Studio.
What’s Included:
- Full CAD Package:
- Laser Cutting DXF Files
- 3D Printing STL Files
- Hand-Cut Printable Templates (PDF, A4 Sheets)
- CNC Machining STEP Files
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
- Arduino Sketch + Wiring Diagram: pre-configured for Arduino Pro Micro / Leonardo USB boards
- Full BuildTutorial: clear instructions that guide you through the entire project without the need for expensive tools or expert-level skills
- Full CAD Package:
-
Hot Sale 33% Off-33%
Pack: DIY Formula One Steering Wheel and Button Plate – CAD Plans
Original price was: $59.98.$39.99Current price is: $39.99.CAD Plans for Formula One Steering Wheel and Button Plates. This is the complete two-in-one bundle.What’s Included: Each project includes:- CAD Model Files (STL, STEP, DXF)
- Arduino Sketch & Wiring Diagram (for Arduino Pro Micro USB Board)
- A complete beginner-friendly build tutorial (no advanced tools required)
- Complete list of all parts you need to build the projects (screws, electronics...)
-
Sim Racing Sequential Shifter – CAD Plans for DIY Build
$29.99These CAD plans give you everything you need to build a durable and fully functional DIY Sim Racing Sequential Shifter at home.What’s Included:- CAD Files for the Sim Racing Sequential Shifter
- Four fabrication formats included:
- Laser Cutting (DXF)
- 3D Printing (STL)
- Hand Cutting Templates (PDF, A4 Sheets)
- CNC Machining (STEP)
- Arduino Pro Micro sketch & wiring diagram
- Full Tutorial: includes both video and blog post tutorial (How to make a DIY Sequential Shifter ?) to help you through the building process
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
View Full Details -
3D Printed H Shifter – DIY CAD Plans
$29.99The 3D Printed H Shifter DIY CAD plans give you everything you need to print and build a fully functional sim racing shifter at home.
What’s Included:
- CAD Model Files for the 3D Printed H Shifter
- STL Files
- STEP Files
- Arduino Sketch & Wiring Diagram: preconfigured for the Arduino Pro Micro USB Board
- Full Build Tutorial: a full guide on How to Make a DIY H Shifter
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
- CAD Model Files for the 3D Printed H Shifter
-
DIY Load Cell Handbrake – CAD Plans
$29.99Make your own DIY Load Cell handbrake. These CAD plans give you everything you need to create a Sim Racing handbrake at home.
What’s Included:
- CAD files for the DIY Load Cell Handbrake
- Four fabrication options included:
- Laser Cutting (DXF)
- 3D Printing (STL)
- Hand-Cut Templates (PDF, A4 Sheets)
- CNC Machining (STEP)
- Bill of Materials: A complete list of all parts required to build this project is available in PDF format (or under the "Bill of Materials" tab), and a second, more general shopping list is available in the BOM & Sourcing Guide.
- Arduino Pro Micro/Leonardo sketch + Wiring diagram
- Build Tutorial: step-by-step instructions that guide you through the entire process (How to make a DIY Sim Handbrake)
-
RigForce EVO 01 – DIY Aluminum Sim Rig Plan
$49.99The RigForce EVO 01 is a DIY Sim Racing project that allows you to build a solid and adjustable aluminum profile sim rig at home.
Features:
- Triple screen mode
- Single screen mode
- You can adjust the steering wheel angle
- Two mounting plates for Fanatec DD or standard direct-drive steering wheels.
- Keyboard holder
- 3D-Printed accessory kit
- Phone holder
- Mug/Bottle holder
- 4040 & 4080 Brackets
What’s Included in the download:
- CAD Files: STEP, STL and DXF files for CNC machining, laser cutting and 3D printing.
- Hand Cutting Templates: Detailed 1:1 A3 PDF drawings with full dimensions in both Metric (mm) and Imperial (Inches).
- Assembly Guide: A comprehensive PDF tutorial to guide you through the build process.
- 3D Animated Assembly Video: Visualize exactly how every piece fits together before you start.
- Bill of Materials: A complete shopping list of screws, bolts, profiles required available in PDF and in the BOM & Sourcing Guide.
View Full Details -
Sim Racing Steering Wheel/Button Box Stickers Pack
$9.99A4 sheet of button, rotary encoder and cars logo stickers. All you have to do is print them on an A4 sheet self-adhesive vinyl sheet, then cut them out with a scalpel before sticking them onto your steering wheels or buttons box.What's included in the download:- Stickers 01 - Buttons & Rotary Encoders (PNG, A4 Sheet)
- Stickers 02 - Buttons & Rotary Encoders (PNG, A4 Sheet)
- Stickers 03 - Buttons & Rotary Encoders (PNG, A4 Sheet)
- Stickers 04 - Buttons & Rotary Encoders (PNG, A4 Sheet)
- Stickers 05 - Car Emblems I (PNG, A4 Sheet)
- Stickers 06 - Car Emblems II (PNG, A4 Sheet)
- Stickers 07 - Car Emblems III (PNG, A4 Sheet)
-
Hot Sale 22% Off-22%
Premium Pack: Sequential Shifter, H-Shifter and Sim handbrake
Original price was: $89.97.$69.99Current price is: $69.99.This premium pack contains three complete DIY products with all premium features:- 3D Printed H-Shifter – CAD Plans
- Sim Racing Sequential Shifter – CAD Plans
- Sim Racing Handbrake – CAD Plans
- Full CAD Model Files: STL, STEP, DXF, and PDF templates when applicable
- Arduino Sketch & Wiring diagram for Pro Micro/Leonardo USB Board
- Complete Beginner-Friendly build tutorials: step-by-step instructions that guide you through the entire process — no advanced skills or expensive tools required.
- Multiple fabrication methods: 3D printing, laser cutting, CNC machining, and hand-cut templates
- Complete list of all parts you need to build the project (screws, electronics...) in the Bill of Materials tabs, PDF files and BOM & Sourcing Guide