DIY F1 Steering Wheel – FEATURES
EASY TO BUILD
This DIY F1 Steering Wheel has been designed to be easy to build without expensive tools or advanced knowledge! And you can ask free assistance in the “Help & Questions” section.
CUSTOMIZATION
Your DIY F1 Steering Wheel is easily customizable. You can modify the front plate as you wish and cover the handles in leather or alcantara. The steering wheel can be covered with carbon.
SAVE MONEY
The Steering Wheel can be built with a small budget, depending on the parameters you have chosen (Choice of material, USB Board…) and the equipment you have (3D Printer).
ASSEMBLY of the DIY F1 Steering Wheel
DIY F1 Steering Wheel shopping list
ELECTRONICS
- Arduino Pro Micro Board
- Micro USB Cable
- MicroSwitch [Option: Handle 11.5mm]
- MicroSwitch alternative link [Option: MS-1A-13.5]
- Alternative USB Board #1 [USB Arcade Encoder Zero Delay]
- Alternative USB Board #2
- Ø12mm Push Button [Option: Momentary]
- Ø12mm Push Button
- Rotary Encoders
MAGNETS
- Ø12×5-4mm N52 Magnet [Option: 12×5-4 MM]
- Ø12×5-4mm N52 Magnet alternative link [Option: 12×5-4 MM]
ACCESSORIES
FINISHING
ASSEMBLY
- 3 Hex Wrench Spanner [Quantity: 1] [Option: 3-4-5mm, 4-5-6mm]
- Allen Hex key [Quantity: 1] [Option: flat head]
- Alternative Allen Hex key
- Screw driver hand tool
- LED Flash light
- Super Glue Liquid Bottle
SOLDERING
- Electric soldering iron
- Soldering station 1
- Soldering station 2
- Soldering wire
- Soldering dross
- Soldering tweezers
- Wire cable stripper
- Wire cable stripper 2
- Metal soldering holder
- M12x1.5 Cable gland [Option: M12x1.5 fit 3-6.5mm]
- GX12 Connector [Option: M12x1.5 fit 3-6.5mm]
ALIEXPRESS SCREWS
- Pandametal Screws Store : most of what you need is here
3D PRINTER
Material of the DIY F1 Steering Wheel
3D PRINTING
As for the DIY Button Plate, I recommend PLA or ABS. For the infill, I recommend a minimum of 20%. Here are recommendations for printing 3D solid parts.
How to get the required materials
3D PRINTING
You can buy a 3D printer, or find a 3D printing service like treatstock.
SCREWS
Bolt depot, Motedis and FixnVis.
Tolerances
3D Printing: 0.6mm
Reviews
There are no reviews yet